User's Manual

Appendix B: Safety Characteristics and Certification
Test methods, limits and performance achieved are shown below (requirement shown in brackets):
Table B-2 Immunity
Test
number
Test name Standard Standard level
2
Radiated, radio-frequency,
electromagnetic field immunity
test
IEC61000-4-3 :
ETSI EN 301 489-17 and
ETSI EN 301 489-3, article
9.2→ EN61000-4-3
Modulation:
80% AM at 1kHz,
80MHz - 1GHz: 10V/m
1.4GHz-2 GHz: 3 V/m
2GHz-2.7GHz: 3 V/m
2.7GHz-6GHz: 3 V/m
Performance: A (A)
3
Immunity to conducted distur-
bances, induced by radio-fre-
quency fields
IEC61000-4-6
ETSI EN 301 489-17 ETSI EN
301 489-3, article 9.5→
EN61000-4-6
Frequency test range : 150KHz
and 80Mhz at 10Vrms
Pause time: 0,5s (Earth, I/O
connections >3m)
Performance A (A)
4
Electrostatic discharge immun-
ity test
IEC61000-4-2
ETSI EN 301 489-17 and
ETSI EN 301 489-3, article
9.3→ EN61000-4-2
± 8 kV air
± 6 kV contact
Performance A (B)
5
Electrical fast transient/burst
immunity test
IEC61000-4-4
ETSI EN 301 489-17 and
ETSI EN 301 489-3, article
9.4→ EN 61000-4-4
±1kV/5kHz and 100kHz on the
I/O ports >3m (not applicable)
Performance A (B)
6
Power frequency magnetic
field immunity test
IEC61000-4-8 30 A/m
Performance A (B)
The definitions of performance criteria are:
Performance criterion A: During test, normal performance within the specification limits.
Performance criterion B: During test, temporary degradation, or loss of function or performance which
is self-recovering.
Performance criterion C: During test, temporary degradation, or loss of function or performance which
requires operator intervention or system reset occurs.
890-00682 EDGE GSF LFID Antenna
25