User's Manual

B Safety Characteristics and
Certification
Safety Characteristics
The EDGE GSF is Safety Class I according to IEC classification and has been designed to meet the
requirements of UL 61010-1 third edition, CAN/CSA-C22.2 nº 61010-1 third edition, EN 61010-1: 2010
(Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use). It is an
Installation Category II intended for operation from a normal single phase or two phase(s) supply accord-
ing to the power cord.
The EDGE GSF has been tested in accordance with IEC61010-1 and has been supplied in a safe condi-
tion. This instruction manual contains some information and warnings which have to be followed by the
user to ensure safe operation and to retain the instrument in a safe condition.
These Safety EU directives were followed:
2014/35/EU The Low Voltage Directive (LVD)
2014/30/EU The Electromagnetic Compatibility Directive (EMC)
EMC characteristics - Emissions Standards
The EDGE GSF has been designed to meet the requirements of the EMC Directive 2014/30/EU, FCC
directives, Industry Canada directives. The compliance was demonstrated by meeting the test limits of
the following standards:
• EN 61000-6-4 (2019) : Emission tests levels for industrial environment
• EN61326-1 (2013) : EMC product standard for Electrical Equipment for Measurement, Control and
Laboratory Use
• IEC EN 60730-1 (2016): Automatic electrical controls for household and similar use - Part 1: General
requirements - EMC requirements
• FCC part 15 Subpart B, class A
• EMC certification: ICES-003 - Information Technology Equipment (ITE) — Limits and Methods –
class A
• ETSI EN 301 489-1 V2.2.3 (2019-11): Electromagnetic compatibility and Radio spectrum Matters
(ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1:
Common technical requirements
• ETSI EN 301 489-17 V3.2.2 (2019-12), ElectroMagnetic Compatibility (EMC) standard for radio
equipment and services; Part 17: Specific conditions for Broadband Data Transmission Systems;
Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU
• ETSI EN 301 489-3 V2.1.1 (2019-03): ElectroMagnetic Compatibility (EMC) standard for radio
equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on
frequencies between 9 kHz and 246 GHz; Harmonised Standard covering the essential require-
ments of article 3.1(b) of Directive 2014/53/EU
890-00682 EDGE GSF LFID Antenna
23