User's Manual
Table Of Contents
- Installation / User Manual
- Chapter 1 Introduction
- Chapter 2 Installation
- Chapter 3 Maintenance
- Chapter 4 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Safety Characteristics and Certification
- Appendix C EC Declaration of Conformity
- Appendix D Innovation, Science and Economic Development Canada Statement
- Appendix E FCC part 15 statement
- Appendix F FCC RF Exposure
- Appendix G FDA declaration
- Appendix H Reduction of Hazardous Substances
- Appendix I Disposal and Recycling Information
- Appendix J California Proposition 65
- Appendix K Product material composition
- Appendix L Packaging Characteristics
- Appendix M EDGE GSF LFID ANTENNA - End-of-Life Disassembly
Chapter 2: Installation
EDGE GSF LFID Antenna Connections
Connection output (5) is dedicated to the LFID Antenna. Connect the LFID Antenna cable to output (5).
Connecting to Power Source
The EDGE GSF LFID Antenna power is supplied by the EDGE GSF. When the EDGE GSF is powered
on, the EDGE GSF LFID Antenna is running.
The EDGE GSF comes with a power cord of 3 meters (9.8 feet). The EDGE GSF voltage is limited by the
power cord provided with the model. Voltage will vary depending on the EDGE GSF model purchased.
NOTE: The working voltage range is between 90 Vac and 264 Vac. The system consumes a power of
65W.
WARNING
Only use LFID Antenna sold by the GSI Group, Inc.
Figure 2-2 EDGE GSF Connection Port Identification
1 — Sprayer 1 connector
2 — Sprayer 2 connector
3 — Sprayer 3 connector
4 — AUX connector
5 — EDGE GSF LFID Antenna connector
6 — Power cord
890-00682 EDGE GSF LFID Antenna
15