User's Manual
Table Of Contents
- Installation / User Manual
- Chapter 1 Introduction
- Chapter 2 Installation
- Chapter 3 Maintenance
- Chapter 4 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Safety Characteristics and Certification
- Appendix C EC Declaration of Conformity
- Appendix D Innovation, Science and Economic Development Canada Statement
- Appendix E FCC part 15 statement
- Appendix F FCC RF Exposure
- Appendix G FDA declaration
- Appendix H Reduction of Hazardous Substances
- Appendix I Disposal and Recycling Information
- Appendix J California Proposition 65
- Appendix K Product material composition
- Appendix L Packaging Characteristics
- Appendix M EDGE GSF LFID ANTENNA - End-of-Life Disassembly
Chapter 1: Introduction
Guidelines for Installation Location
Consider the environment, mounting recommendations, and clearance space to choose the ideal location
for your system.
Operating Environment
• The ideal ambient temperature is between 20 °C and 25 °C (68 °F - 77 °F). The temperature should
not go lower than 0 °C (32 °F) and should not exceed 40 °C (104 °F).
• Ensure there is sufficient ventilation around the unit.
• Install the EDGE GSF far from sources of vibrations and where they are not likely to get bumped.
IMPORTANT: If you are not planning on installing the system immediately, store the units in a cool dry
place.
Clearance
The EDGE GSF must be mounted in a location that has sufficient air circulation around the enclosure and
to ensure protection against electrical conducted or radiated noise.
WARNING
If the EDGE GSF is installed inside a pen, make sure to install the fence option on
the stall.
890-00682 EDGE GSF LFID Antenna
11