User's Manual

User Manual
SmartCell Repeater
5
1. INTRODUCTION
SmartCell is a modular repeater designed to improve signals in blanket/shadow areas inside
buildings. It can transmit signals at 700MHz, 850MHz, 1900MHz, and 2100MHz frequencies.
User may choose filtering configurations according to the specific site’s requirements.
1.1 GST SmartCell Repeater Advantages
 It provides selectable RF power levels for any wireless technology / band.
 It provides monitoring for multiple technologies.
 Its digital filter provides optimized RF performance.
 It allows the users to modify the technologies via a web user interface.
 It is easy to add or change frequencies.
 It has scalable modular design.
 Data service is improved by the addition of 4G (LTE).
 Wall mount or rack mountable single chassis design.
 AMP modules are interchangeable and hot swappable.
 Optional low loss multiplexor allows user a centralized cable connection point for
donor and service antennas.
 Multiples of same technology amplifiers can be used simultaneously.
 A single PSU provides power to the entire system up to 4 amplifier modules.
1.2 Abbreviation
DFM Digital Filter Module
PSU Power Supply Unit
ALC Auto Level Control
SNMP Simple Network Management Protocol
AOC Auto Oscillation Control