User's Manual

Verizon User Manual
Smart-Cell Repeater
12
On / Off control of the service Block is possible. Each block‘s bandwidth are as follows.
(CDMA[UL] – 1.25MHz, LTE[UL] – 4.505MHz, CDMA[DL] – 1.25MHz, LTE[DL] – 4.505MHz)
2.3.5. 850MHz Frequency Selection
<Figure 7> Smart-Cell Repeater 850 Block Diagram
850MHz Cellular service provides by default, and supports up to two non-contiguous
blocks. Each block‘s bandwidth are as follows, and it is possible to choose any
combination of any band. (A1 - 11MHz, B1 - 10MHz, A2 - 1.5MHz, B2 - 2.5MHz.)
2.3.6. 1900MHz Frequency Selection
<Figure 8> 1900MHz Band Frequency
1900MHz AMP Unit is basically complied with PCS Band block, where maximum three
non-contiguous filtering configurations are available. Each sub block is adjustable per
1.25MHz bandwidth step up to 20MHz. Following table shows user selectable channel
numbers.
BAND
DL CENTER
[MHz]
CHANNEL
BAND
DL CENTER
[MHz]
CHANNEL
A
A1
1931.25
25
guard
1965
700
1932.5
50
E
1966.25
725
1933.75
75
1967.5
750
guard
1935
100
1968.75
775
A2
1936.25
125
guard
1970
800
1937.5
150
F
1971.25
825
1938.75
175
1972.5
850
guard
1940
200
1973.75
875