User's Manual
Table Of Contents
- 1. SUMMARY
- 2. System Configuration
- 4. SET UP
- 4.1 System Set up
- 4.2 Troubleshooting
- 4.2.1 Necessary Testing and Measuring Equipment
- 4.2.2 Notice
- 4.2.3 Simple Troubleshooting Method
- 4.2.5 Troubleshooting Guide Related to LED
- Rectifier Module Red LED or Individual Faults
- Rectifier Voltage Fault
- MCA and FEU Fault
- MCU Fault
- 4.2.6 Troubleshooting Guide Related to RF
- 4.2.7 Troubleshooting Guide Related to NMS
User Manual
MCPA Outdoor System
5/19
2. System Configuration
2.1 System Description
2.1.1 Linear Technology
RF Circuit Composition is Simple
Feed Forward of Matched Broad-band Quality
Feed Forward Linear Technology Increases Efficiency and Reduces Heat
2.1.2 Modular System
If One Sector MCA Module Fails, the Other Sectors Will not be affected Modules
Moved In and Out for Easy Replacement, Optimizes Size
2.1.3 Passive Intermodulation
Poor Contact Junctions
Components Made with or Plated with Materials that Exhibit Some Level of Hysteresis
Low Passive IMD System
2.1.4 Safety Design
Individual FAN Temperature Sensor
Automatic Bypass Function
2.1.5 User Friendly
Web UI Interface, Easy Check and Control
System/Status: Displays current firmware and user controllable configurations.
Status/Alarm: Displays the status of all the individual alarm parameters.
System/Configuration: Displays and allows modification to system configurations.
System/Download - Firmware related interface.
Dry Contact Alarm - interface to existing base station alarm reporting circuits.