User's Manual
Table Of Contents
- 1. SUMMARY
- 2. System Configuration
- 4. SET UP
- 4.1 System Set up
- 4.2 Troubleshooting
- 4.2.1 Necessary Testing and Measuring Equipment
- 4.2.2 Notice
- 4.2.3 Simple Troubleshooting Method
- 4.2.5 Troubleshooting Guide Related to LED
- Rectifier Module Red LED or Individual Faults
- Rectifier Voltage Fault
- MCA and FEU Fault
- MCU Fault
- 4.2.6 Troubleshooting Guide Related to RF
- 4.2.7 Troubleshooting Guide Related to NMS
User Manual
MCPA Outdoor System
4/19
1. SUMMARY
1.1 Overview
MCPA System was designed to improve communication coverage/service quality and customer
satisfaction for mobile handset users in coverage areas such as metropolis, urban areas, high
dense area and BTS Cell are target candidates for installation. MCPA (Multi-Carrier Power
Amplifier) B ooster system provides high performance network u pgrade s olution ranging from
highly capital-intensive options
1.2 Characteristic
Compensate Loss of Feeder Line between BTS and Antenna.
Expand US-PCS BTS Coverage/ Service Coverage.
Continuous Service with no Trouble is available by Bypass. (RF Switch)
Be able to amplify output power of up to 200W due to enable to regulate Gain of 5.5
~14.5dB on the case of TX Signal though low Output power of existing BTS.
Enable to Remote Control through communication of SMS using by existing PCS Network,
monitor and manage easily for a notebook through Ethernet communication.
Abbreviation
MCPA : Multi-Carrier Power Amplifier
BTS: Base Transceiver Station
MCA: Multi-Carrier Amplifier
FEU: Front End Unit
MCU: Micro Controller Unit
PSU: Power Supply unit