User's Manual
Table Of Contents
- 1. SUMMARY
- 2. System Configuration
- 4. SET UP
- 4.1 System Set up
- 4.2 Troubleshooting
- 4.2.1 Necessary Testing and Measuring Equipment
- 4.2.2 Notice
- 4.2.3 Simple Troubleshooting Method
- 4.2.5 Troubleshooting Guide Related to LED
- Rectifier Module Red LED or Individual Faults
- Rectifier Voltage Fault
- MCA and FEU Fault
- MCU Fault
- 4.2.6 Troubleshooting Guide Related to RF
- 4.2.7 Troubleshooting Guide Related to NMS
User Manual
MCPA Outdoor System
19/19
.2.7 Troubleshooting Guide Related to NMS
Symptom
Check Points
Troubleshooting
Link Fail
Communication problem
-In case of Ethernet, verify IP addressing, DHCP
function, and that cookies are deleted
-Verify that a crossover Ethernet cable is being used
CLI connection,
cable
status check
-Make sure 1:1 connection
-
Follow instructions in the installation guide for this
connection procedure
CLI connection Check by
USB to serial cable
-Please verify port number of PC communication
-Please check cable connection status