User's Guide

STEP 4. Run the Cable to the Booster
Connect the cable from the booster to the window at cable.
To Booster
Cable (20 ft.)
1 ft. Window Flat
Cable
40 ft. N-SMA
Coaxial Cable
Outside
Antenna
Signal Booster20 ft. SMA-SMA
Coaxial Cable
HOME 3000 Cable Line
STEP 5. Install the Signal Booster
Choose a location for the signal booster, preferably away from excessive heat, direct sunlight,
moisture and free from high temperatures. Do not place the signal booster in an air-tight
enclosure. Attic installations may expose the booster to high heat.
Signal Booster’s Back View
Connect the Bar antenna to the ‘Inside Antenna’ port.
Connect the AC/DC power adaptor to the booster and plug into a power source.
The power LED will light, indicating that the signal booster is ready for use.
Power
700
850
1900
2100
The Booster should be installed a minimum distance of 20 ft. from the outside antenna.Note
700
850
1900
2100
To Booster
Cable (20 ft.)