User's Manual

Version

1.3

Date

November 18, 2016

Page

27/ 61

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

6.7. Download

• To changed and updated features of system operation and monitoring program

- Upgrade software or install a patch with minimal loss of service

(Less than 2mins except for FPGA Program)

- To handle a full software load and to receive/ error-check at the same time

- If the load is rendered unsatisfactory after the upload, it will automatically revert

to the old software load

6.8. NMS Operation

• Fault diagnostics and maintenance features can be available both through the Sprint proprietary

Network

• Management System (NMS) and locally at the Outdoor Repeater via Local Craft Terminal (LCT)

• All functions that can be performed at the local craft port (physical device) are available thru the

remote interface

• All configuration screens at the local craft port physical device location appear identically at the

remote location

6.9. System Gain Auto Saving

• Save the System Gain according to period for preparing the Power-Off or Reset

• In case of the Repeater is turned off or Reset, Support to re-optimize the system using saved

gain as soon as possible