User's Manual

Sprint User Manual
Digital TRI-Band Indoor Repeater
17
/
22
• Setting and maintenance of output level
• Additional attenuation to ALC Level
Band Select
• To select either 5MHz/10MHz/15MHz/20MHz (PCS)
• To select either 18MHz/7MHz (IDEN 800)
Power Monitoring
Function
• Monitoring repeater’s output level
DL Input control • Monitoring Donor ANT input power of DL
Automatic Recovery
• When repeater is shutdown, it periodically recovers output power of
repeater then monitors alarming
Security
• Support HTTPS for Web Browser security
• User authentication through User ID and Password
Temperature
Monitoring
• Monitoring temperature of repeater
• Maximum and minimum set up is possible
• Shutdown in over temperature
• Automatic recovery after temperature becomes normal (Hysteresis 10
degree)
VSWR Monitoring
• Monitoring VSWR of Donor ANT Port (Every one and half minute)
• Reporting VSWR Alarm and Shutdown when the rate is 3.5:1
IP address report via
E-mail
• When in PPP reconnection, E-mail which includes HTML to connect to
newly assigned IP Address, reports to operator.
DHCP Client • Automatic IP assignment
DHCP Server • Server function for automatic IP assignment
Web GUI • Remote and local user browser support through Web Browser
SNMP Agent • NMS report via SNMPv2 Trap
LED Display
• LED displays power and operation status on front side of repeater
system
• Input and Output signal levels are verified by LED bars