User's Manual

Bell Mobility User Manual

In-building Repeater

a. RF Power Meter: 10Watt Max, 50ohm

b. Signal Generator: 3GHz

c. Spectrum Analyzer: 3GHz

d. Multi-Meter

4.2.2 Notice

a. Troubleshooting should be performed by a trained technician.

b. Parts that seem to be not used should not be disassembled.

c. While troubleshooting, technician should use attenuator to check RF Signal output.

4.2.3 Simple Troubleshooting Method

a. Verify LED Status, both on external LED’s as well as internal module LED’s

- Normal operation: Green light On. Alarming: Red LED on

b. Technician should check external and internal connectors to ensure that all connections are

tightly secure. These connectors should be cleaned regularly.

c. If technician thinks there is a serious problem, call after sales team for over-the-

phone technical support. 1-866-9-GST-USA (1-866-947-8872)