User's Manual
© 2010, GS Teletech, Inc.
29
Version 0.2
May 2010
Band Select Status
• In case that screen resolution is 1024 x 768, you may need to use scroll bars to view all.
• This is where installer will verify status of the selected bandwidth and channels.
• In order to change alarm settings, click on Alarm Conguration link.
Under normal operating conditions the
Alarm Status color in the Status page is
green.
After an Alarm condition is triggered, the
Alarm Status color in Status page will be
yellow.
After an Alarm condition lasts for the
“Delay Alarm Reporting Minutes” set in
RF Conguration page, the Alarm will be
reported and the Alarm Status color in the
Status page will be red.