User's Manual

© 2010, GS Teletech, Inc.
62
Version 0.2
May 2010
CLI
• In order to see values, you should type “get all”, and then press the enter-key.
• You can use LAN_Port_IP_Address to access the Web UI as described on page 22.
• In case Obtain_an_IP_Address_automatically is STATIC or DHCP_Server is OFF, at the “communication>”
prompt enter the following text:
“set Obtain_an_IP_Address_automatically DHCP”, then press the enter-key.
“set DHCP_Server ON”, then press the enter-key.
“commit”, then press the enter-key.