User's Manual

Version 0.1
ؼ
April 2010
© 2010, GS Teletech, Inc.
11
Connecting Power Cable and LED Light Verifi cation
• Connect Power Cable
• When turning on the repeater, AGS (Auto Gain Setup) is automatically activated, which shows LED indicators are
turned on one by one.
• After all the LEDs are on, AGS is complete.
• Please verify that all the LEDs are indicating proper input and output levels.
<Figure 9> AC Power Port Connection <Figure 10> Veri cation of LED Lights
Version 0.1
ؼ
April 2010
© 2010, GS Teletech, Inc.
12
LED Indicators
RUN LED : Green light ON
ALARM LED : Yellow light is alarm status
SHUT DOWN LED : Yellow light is shutdown status
<Figure 11> Front LED Display