Manualshelf

User's Manual

ManualsBrandsGS Instech ManualsElectronicsIn-Building RF Repeater
11121314151617181920
Version 0.1
ؼ
April 2010
© 2010, GS Teletech, Inc.
31
Automatic Setup Using AGS Function
•
The screen shown below will be displayed while AGS is initializing.
• After AGS is completed normally, click “Click Result”. The equipment will set AGC, Gain Balance
and HPA “ON”, and then provide normal service. If automatic setup works you will see the Status page. (ALC “Off”)
Version 0.1
ؼ
April 2010
© 2010, GS Teletech, Inc.
32
Alarm Confi guration
•
Click Alarm Configuration link.
•
In case that Report Alarms is OFF, all alarms will be disabled. In case that Report Alarm is ON,
you can enable and disable individual alarms.