Radio User Manual

Display
Display
The display provides information about the functioning of
your world receiver:
• While the radio is switched off, the current time will be
indicated. The first time it is used, or if the memory is
erased, ‘0:00’ will appear on the display.
• When the radio is switched on, the frequency in kHz
or MHz and the wave band FM, MW, SW1 or SW2 will
be indicated.
•
When the alarm is switched on, the alarm mode
(Alarm and radio or buzzer) will be
indicated.
• this indicator lights up when a certain station is
correctly turn to.
• indicates stereo reception for FM.
• SLEEP indicates that the sleep time function is active.
• LOCK indicates that all buttons are locked.
• indicates that batteries should be replace.
• MEMO lights up when you are storing stations.
Switch the display mode
You can change the information that appears on the
display of the G-2000A with the MODE button.
When the radio is off:
-The display shows the current time mode (HOME or DUAL
).
• If you wish to check the other settings, press MODE
briefly.
-The display changes each time you press the button.
-The display will return to the current time automatically
after five seconds (or press MODE briefly).
When the radio is on:
- The display shows the frequency.
• If you wish to check the other settings, press MODE
briefly.
- The display changes each time you press the button.
- The display will return to the frequency indication
automatically after five seconds (or press MODE briefly).