Operation Manual

ENGLISH
46
SPECIAL SETTINGS
-----------------------------------------------------------------------------------------------------
Select the next digit position with »
V
« (you
can switch back with » «).
Repeat the procedure for all characters.
Confirm the number by pressing »OK«.
Note:
7
The primary and secondary DNS (Domain
Name System) are the network address of
the server allocated by the provider.
10 Enter the Primary DNS.
Select the first number with » « or » « and
press »OK« to confirm.
Select the next digit position with » « (you
can switch back with » «).
Repeat the procedure for all characters.
Confirm the number by pressing »OK«.
11 Enter the Secondary DNS.
Select the first number with » « or » « and
press »OK« to confirm.
Select the next digit position with » « (you
can switch back with » «).
Repeat the procedure for all characters.
Confirm the number by pressing »OK«.
Note:
7
The SSID (Service Set Identifier) is the
WLAN network code, and is used to iden-
tify this wireless network.
12 Enter the SSID:
Enter the first character with » «, » «, » « or
» « and press »OK« to confirm.
Repeat entry for all other characters.
Once the network key has been entered
completely, press » «, » «, » « or » «
to select the push button »OK« and press
»OK« to confirm.
Notes:
7
Numbers, capital and lower case letters
and special characters are available for
input.
7
Scroll through the menu pages with » « or
» « to select all other characters.
7
If you make a mistake during entry, press
» «, » «, » « or » « to select the push
button »BKSP« and press »OK« to confirm.
The last character is deleted.
7
If you wish to exit the menu prematurely,
press » «, » «, » « or » « to select the
push button »CANCEL« and press »OK«
to confirm. The device switches back one
menu level.
Note:
7
The encryption settings of the device must
match those of the router.
13 Select the encryption level with » « or » «
and press »OK« to confirm.
Note:
7
You can select different encryption levels:
»Open« – Choose between »Disabled«
and »WEP«.
»Pre-Shared Key« – Choose between
»Disabled« and »WEP«.
»WPA« – Choose between »TKIP« and
»AES«.
»WPA2«: highest security level – Choose
between »TKIP« and »AES«.
14 Enter encryption level.
Enter the first character with » «, » «, » «
or » « and press »OK« to confirm.
Repeat entry for all other characters.
Once the network key has been entered
completely, press » «, » «, » « or » «
to select the push button »OK« and press
»OK« to confirm.
Notes:
7
»Please wait, processing« now appears in
the display. The connection to the WLAN
router and therefore to the Internet is being
established.
7
If connection is successful, » Connected«
appears on the display.
7
If connection has failed, »Failed to connect«
appears on the display.