Operation Manual

45
ENGLISH
Setting the WLAN region
You must set the WLAN region in accordance
with the location of the device.
1 Press »MENU« to open the menu.
2 Select the option »System settings« with » «
or » « and press »OK« to confirm.
3 Select the option »Network« with » « or
» « and press »OK« to confirm.
4 Select the option »Wlan region« with » « or
» « and press »OK« to confirm.
5 Select the appropriate WLAN region with
» « or » « and press »OK« to confirm.
6 End the setting by pressing »MENU«.
Deleting servers which cannot
be accessed
This function allows you to delete servers for
which access data is still stored in the device,
although they are no longer available.
1 Select the input source »Music player« by
pressing »M«.
2 Select the option »Prune servers« with » « or
» « and press »OK« to confirm.
3 Select the push button »YES« with » « or » «
and press »OK« to confirm.
Note:
7
If the push button »NO« is selected and
confirmed, then the deletion process will be
cancelled.
Registering the device with the
WLAN router with individual
network settings
These settings require advanced knowledge of
network configuration.
1 Press »MENU« to open the menu.
2 Select the option »System settings« with » «
or » « and press »OK« to confirm.
3 Select the option »Network« with » « or
» « and press »OK« to confirm.
4 Select the option »Manual settings« with » «
or » « and press »OK« to confirm.
5 Select the option »Wired« or »Wireless« with
» « or » « and press »OK« to confirm.
6 Select the option »DHCP enable« or »DHCP
disable« with » « or » « and press »OK« to
confirm.
Notes:
7
Setting »DHCP disable« means all address-
es must be entered manually.
7
If »DHCP enable« is set, the addresses are
automatically assigned by the router. If you
have selected »DHCP enable«, continue
with step 12.
7 Enter the IP address.
Select the first number with » « or » « and
press »OK« to confirm.
Select the next digit position with » « (you
can switch back with » «).
Repeat the procedure for all characters.
Confirm the IP address by pressing »OK«.
8 Enter the Subwork mask.
Select the first number with » « or » « and
press »OK« to confirm.
Select the next digit position with » « (you
can switch back with » «).
Repeat the procedure for all characters.
Confirm the number by pressing »OK«.
9 Enter the Gateway address.
Select the first number with » « or » « and
press »OK« to confirm.
SPECIAL SETTINGS
-----------------------------------------------------------------------------------------------------