Operation Manual

41
ENGLISH
TIMER MODE
--------------------------------------------------------------------------------------------------------------------------
Interrupting the alarm
1 Press »S« while the alarm is sounding.
– Display: »

« flash.
– The alarm (signal tone or radio) stops.
Note:
7
The alarm will sound again depending on
how often a button has been pressed (1
time = after 5 minutes, 2 times = 10 min-
utes, 3 times = 15 minutes, 4 times = 30
minutes. The total alarm time in 90 minutes.
Cancelling alarm stand-by
1 While the timer is sounding, press »ON/
OFF«.
– If the timer is set to »Once«, the timer signal
stops and »

« disappears.
– If the timer is set to »Daily«, »Weekends« or
»Weekdays«, the timer signal stops and
»

« appear for the next day.
Activating and deactivating the timer
1 Open the menu »Alarm« using »AL1« and
»AL2« on the remote control.
– The »Alarm« menu appears.
2 Select the option »Enable« with » « or » «
and press »OK« to confirm.
3 To deactivate »Alarm 1« or »Alarm 2«, select
»Off« with » « or » « and press »OK« to
confirm.
4 Select the option »Save« with » V « or » Λ «
and press »OK« to confirm.
– The Timer is deactivated.
Note:
7
To activate the alarm time, reselect the
alarm cycle in the »Cycle« menu and store
it.
Sleep timer
Setting the sleep timer
By using the button »S/N«
1 Switch on the device by pressing »8« on the
remote control or »ON/OFF« on the device-
and select the preferred sound source.
2 Open the sleep menu with »S/N« on the
remote control.
3 To set the switch-off time from »15« till »120«,
press »S/N« on the remote control repeat-
edly.
– Display: » « and the switch-off time ap-
pears.
– After the selected time has elapsed
»

Going to sleep…« appears, and the
device switches off, » « disappears.
By using the Menu
1 Switch on the device by pressing »8« on the
remote control or »ON/OFF« on the device.
2 Press »MENU«, select the »Main menu« with
» « or » « and press »OK« to confirm.
3 Select the option »Sleep« with » « or » «
and press »OK« to confirm.
4 To set the switch-off time from »15« till »120«,
press » « or » « and press »OK« to con-
firm.
– Display: » « and the switch-off time ap-
pear.
– After the selected time has elapsed
»

Going to sleep…« appears, and the
device switches off, » « disappears.
Cancelling the sleep timer
1 To switch off the sleep timer before the set
switch-off time, refer to previous section and
select »Sleep off« at step 3;
or
switch the device to standby mode by press-
ing »8« on the remote control or »ON/OFF«
on the device.