Operation Manual

ENGLISH
40
TIMER MODE
--------------------------------------------------------------------------------------------------------------------------
Your device has 3 timer modes:
– The switch-on timer, which switches the
device on at the set time and wakes you
with the input source you selected.
– The sleep timer, which switches the device
off at a preset time.
– The reminder timer (NAP), reminding you
by sounding the signal tone at a preset
time.
Switch-on timer
Setting the timer
1 Switch on the device from standby mode by
pressing »8« on the remote control or
»ON/OFF« on the device.
2 Press »MENU« to open the menu.
3 Select the option »Main menu« with » « or
» « and press »OK« to confirm.
4 Select the option »Alarms« with » « or » «
and press »OK« to confirm.
5 Select the option »Alarm 1« with » « or » «
and press »OK« to confirm.
– »Alarm 1« submenu appears on display.
Alarm 1
Enable: Off
Time: 00:00
Volume: 12
Mode: Internet radio
Preset: Last listened
6 Select the option »Enable« with » « or » «
and press »OK« to confirm.
Select the preferred option (»Daily«, »Once«,
»Weekends« or »Weekdays«,) with » « or
» « and press »OK« to confirm.
7 Select the option »Time« with » « or » «
and press »OK« to confirm.
– Display: The clock digits for the hours flash.
Press » « or » « to set the alarm hour and
press »OK« to confirm.
– Display: The clock digits for the minutes
flash.
Press » « or » « to set the alarm minute and
press »OK« to confirm.
– Display: The previous menu reappears
automatically.
8 To set the timer source, select the option
»Mode« with » « or » « and press »OK« to
confirm.
Press » « or » « to select the timer source
from »Buzzer«, »Internet radio«, »DAB« or
»FM« and press »OK« to confirm.
– Display: The previous menu reappears
automatically.
Note:
7
If you select one of the »Internet radio«,
»DAB« or »FM« options, »Alarm preset«
submenu opens. Press » « or » « to
select »Last listened« or one of the presets
and press »OK« to confirm.
9 Select the option »Volume« with » « or » «
and press »OK« to confirm.
Press » « or » « to set the volume level and
press »OK« to confirm.
10 Select the option »Save« with » « or » «
and press »OK« to confirm.
– »Alarm saved« appears in the display.
Notes:
7
To set the second alarm time (»Alarm 2«)
repeat steps 5 to 10.
7
The setting for the alarm times 1 and 2 can
also be opened directly using the buttons
»AL1« and »AL2« on the remote control.
7
If no button is pressed for 10 seconds while
setting, the system will quit the process
automatically, and you have to start again.
11 Switch the device to standby by pressing
»8« on the remote control or »ON/OFF«
on the device.
– Display: Date, time and »

« with the
alarm time.
– The alarm sounds at the set time with the
alarm signal selected.