Operation Manual

37
ENGLISH
AUX MODE
--------------------------------------------------------------------------------------------------------------------------------
Listening to an external source
You can listen to the audio signal from the ex-
ternal device connected through your system’s
speakers.
1 Switch on the device from standby mode by
pressing »8« on the remote control or
»ON/OFF« on the device.
2 Use a standard audio cable (not supplied) to
connect »AUX IN« on the back of the device
to an AUDIO OUT socket on the external
equipment.
3 Press »M« repeatedly until »Aux in« appears
in the display.
4 Start playback on the external device.