Operation Manual

19
ENGLISH
Saving DAB radio stations on presets
You can use the remote control to fill 10 presets
with the DAB radio stations of your choice. If
you assign the presets again, the previously
saved stations are overwritten.
1 Search for the DAB station as described.
2 To save stations, keep pressing the number
button »1 ... 0« until »Preset stored« appears
in the display.
– The station stored with a preset number
then appears in the display.
3 To store more stations, repeat steps 1 and 2
as many times as necessary.
Setting Dynamic Range Control
(DRC) for DAB stations
When you activate Dynamic Range Control
(DRC), you can hear quiet sounds better in a
loud environment.
1 Press »MENU« to open the DAB menu.
2 Select the option »DRC« with » « or » «
and press »OK« to confirm.
– Display: e.g. »DRC off« (no DRC).
3 Select the value (»DRC high« or »DRC low«)
with » « or » « and press »OK« to confirm.
Note:
7
The DAB station must support DRC.
Setting FM stations
Setting the search mode
There are two different automatic station search
modes.
1 Press »M« repeatedly until »FM radio« ap-
pears on display.
2 Press »MENU« to open the »FM« menu.
FM
Scan setting
Audiosetting
System settings >
Main menu >
3 Select the option »Scan setting« with » « or
» « and press »OK« to confirm.
– Display: »Strong stations only?«.
4 Select your setting (»YES« or »NO«) with » «
or » « and press »OK« to confirm.
5 Press »MENU« to end the setting.
Automatic station search
1 Press and hold » V « or » Λ «. When you re-
lease the button, the automatic search stops at
the next FM station.
– If RDS information is transmitted by the
broadcaster, then the device saves the sta-
tion name. If station and title information is
transmitted, it will appear as ticker text after
a short time.
Tuning stations manually
1 Move the frequency forward in brief steps by
repeatedly pressing » « or » «.
– The frequency goes up or down in 50 kHz
steps.
Saving FM radio stations on presets
You can use the remote control to fill 10 presets
with the FM radio stations of your choice. If you
assign the presets again, the previously saved
stations are overwritten.
1 Search for the FM station as described.
2 To save stations, keep pressing the number
button »1...0« until »Preset stored« appears
in the display.
– The stored station with a preset number
then appears in the display.
Note:
7
Button »0« is used for preset 10.
3 To store more stations, repeat steps 1 and 2
as many times as necessary.
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------