Operation Manual
12
ENGLISH
OPERATION ______________________________
10 Press and hold down the On/Off switch
U
of the steam iron station
C
for a few seconds
to switch the steam iron station
C
off. Set the
temperature control dial
K
to MIN and dis-
connect the plug from the power outlet.
11 Let the appliance cool down in a location
that is safely out of reach of children.
Caution
7
Never touch the hot soleplate
M
with bare
hands. Danger of Burns!
Notes
7
If the steam function has not been used for
some time the water condensed in the steam
hose transforms into water. When restarting
the steam iron station
C
again, it could cause
spluttering of the unit and water droplets at the
soleplate
M
. In order to avoid these droplets
falling onto your garments we recommend
using an old clean cloth in the beginning. Press
the steam button
I
until the droplets disap-
pear and normal steam will be produced.
7
If dirt particles escape from the soleplate
M
,
clean the steam iron station
C
according to the
instructions in section “Cleaning and care”.
7
The steam iron station
C
will automatically
switch off if no button or any other control ele-
ment has been activated for a period of 10
minutes.
Steam burst
During ironing, in order to remove tenacious
creases, you can gain strong steam by pressing
on the steam burst button
H
for 3-4 times with
5-second intervals.
When you start to iron, steam burst may not
emit in your first couple of presses. In order to
gain steam burst, the temperature setting dial
B
marked with .
You can iron the creased parts of the garments
with the steam power which is obtained by
pressing the steam burst button
H
during steam
ironing. However if this process is maintained
without an interruption, water may also come
from the iron soleplate
M
along with the steam.
Vertical steam ironing
Note
7
Vertical steam ironing can be applied to
hanging curtains or clothes (suits, jackets and
coats).
Caution
7
Never direct the steam at people or pets.
1 The steam iron station
C
has three steam set-
tings: low, medium and high. Please refer to
section “Steam ironing”.
2 When the control indicator in the selected
steam setting remains lit, it indicates that the ap-
pliance is ready for steam ironing.
3 Hold the iron in vertical position on the
garments or curtains and press the steam
button
I
. Continue to move the iron when
ironing.