Operation Manual

10
ENGLISH
OPERATION ______________________________
Preparation
1 Remove all packaging materials, labels and
protective foil and dispose of them according
to the applicable legal regulations.
2 Clean the outer parts of the appliance as de-
scribed in the section “Cleaning and care“.
3 Place the appliance on an even, stable, dry
and non-slip surface.
4 Place the iron onto the storage base
L
.
Notes
7
During first use, a slight odour may occur as
a result of manufacturing residues being burnt
off. This is harmless and will only last for a
short time. Ensure for sufficient ventilation.
7
Never immerse the steam iron station
C
in
water or any other liquid. Do not fill in the
steam iron station
C
with vinegar, descaling
agents, starch, perfume or ironing aids.
7
When ironing for the first time, use an old,
clean cloth so that manufacturing residues
can be removed from the soleplate
M
.
Dry Ironing
1 Place the appliance on an even, dry and non-
slip surface. The non-slip feet
W
ensure the sta-
bility of the appliance.
2 The water tank
N
must remain empty during
the dry ironing process; otherwise steam pres-
sure could build up.
3 Insert the power plug
B
into the wall socket.
4 Push the On/Off switch
U
to switch on the
steam iron station
C
.
– The power indicator
O
lights up and the
steam indicator light blinks on low
T
.
5 Depending on the type of fabric, turn the tem-
perature control dial
K
to one of the following
settings:
Nylon / Silk •
Wool ••
Cotton •••
Linen max
Caution
7
Always read the care label on your garment
before setting the temperature.
– The temperature indicator light
E
lights up.
The temperature indicator light
E
remains
on while the iron is heating up. As soon
as the iron reaches the set temperature,
the temperature indicator light
E
goes off.
The temperature indicator light
E
will go on
and off during usage to indicate that the set
temperature is being regulated.
6 The ironing process can begin. Do not press
the steam button
I
during dry ironing.
Caution
7
When taking a break from ironing, always
place the iron back onto the storage base
L
. The tip of the soleplate
M
must always be
placed on the surface of the storage base
L
.
7 After the ironing process is complete, place the
iron onto the storage base
L
. Press and hold
down the On/Off switch
U
of the steam iron
station
C
for a few seconds to switch the steam
iron station
C
off. Set the temperature control
dial
K
to MIN and disconnect the plug from
the power outlet.
– The power indicator light
N
and the steam
indicator light LOW
T
go off.