Operation Manual

53
ENGLISH
Memory Function
The memory function works in normal mode
only.
1 To save a nutritional value to the memory,
press
M
+ button
G
.
– M01 appears on the display
B
which
indicates that the value has been saved to
the memory.
2 To add and save another nutritional value,
press ON/OFF/TARA button
H
or remove
the previous food.
3 Enter the new food’s code by using the
numeric buttons
M
. Refer to the “Food code
table” for the food code.
4 Put the new food to be weighed on the
weighing surface
A
.
5 Press
M
+ button
G
.
– M02 appears on the display
B
.
6 To add more nutritional values, follow the
steps from 2 to 5.
Notes
7
The device can only save foods in the existing
database. You cannot add new food items.
7
When the batteries are removed, the memory
gets cleared.
7
You can add maximum 99 food items to the
memory.
Recalling the memory
1 Press MR/MC button
J
to see the total of the
stored nutritional values in the memory.
– ΣMXX appears on the display
B
.
2 Press MR/MC button
J
to return to the
normal mode.
Clearing the memory
1 Press MR/MC button
J
to see the total of the
stored nutritional values in the memory.
– ΣMXX appears on the display
B
.
2 Press and hold MR/MC button
J
to clear the
memory.
OPERATION ______________________________
Nutrition facts calculator mode
You can use this feature for the foods which have
a nutrition facts label on their package, can, box
or container.
1 Place the appliance on a stable, flat, clean,
dry and non-slip surface.
2 Press ON/OFF/TARA button
H
to turn the
appliance on.
– Wait for approximately 2 seconds for the
appliance to be ready for operation.
Note
7
If it is not being used, the appliance turns off
automatically after 2 minutes.
3 The appliance is ready for operation when
“0 g” and “FOOD CODE 000“ are shown in
the display
B
.
4 Put the food to be weighed on the weighing
surface
A
.
5 Press the Mode button
I
.
– Serving size, nutrient and equals digits ap-
pear as “0” on display.
6 Press the SERV button
F
.
– Serving size digits flash as “000”.
7 Enter the serving size in grams which is written
on the nutrition facts label on the food’s
package, can, box or container (see the
example below).
– The entered value flashes on the display.
8 Press the NUTR button
K
.
– The serving size value stops flashing. Nutri-
tion digits flash as “0000”.
9 Enter the required nutritional value which
is written on the nutrition facts label on the
food’s package, can, box or container (see
the example below).
– The entered value flashes on the display.
10 Press the = button
C
.
– The nutritional value stops flashing. The
result of the calculation appears at the
equals line.