Operation Manual

20 ENGLISH
5 Gently shake out the remaining
moisture and then dry off the appli-
ance with a clean cloth.
6 Replace the foil frame and let it
latch into place.
Cleaning with the brush
1 Turn the appliance off.
Caution
■ The appliance must be disconnect-
ed from the power adapter.
2 Remove the foil frame. To do so,
push the side lock buttons
B
.
3 Remove the blade blocks
G
for
cleaning by pulling them upwards
off the oscillator
H
.
4 Carefully brush hair clippings out
of the blade blocks, the foils and
the housing.
CLEANING AND CARE __________________
Cleaning and care
General information
The appliance must be cleaned regu-
larly so that you can continue to en-
joy its top performance and optimum
results. Clean the housing with a soft
cloth and a mild detergent. Do not
use any cleaning agents.
Cleaning with water
1 Push the On/Off switch
C
to
switch off the appliance.
Caution
■ The appliance must be disconnect-
ed from the power adapter.
2 To remove the foil frame, push
the side lock buttons
B
with your
thumb to lift up the foil frame.
3 Rinse out the foil frame under run-
ning water.
4 To remove all hair, hold the blade
blocks
G
under running water and
switch on the appliance.