Operation Manual

11ENGLISH
OPERATION ___________________________
Preparation
1 Clean the milk frother well be-
fore first use. For details please
read the "Cleaning and care"
section.
Operation
1 Open the lid
A
.
2 Fill the jug with milk.
– For frothing -max. 150 ml (min-
imum level indicator).
– For Heating -max. 250 ml
(maximum level indicator).
Notes
7
Do not place the jug
C
on the
base
E
while filling it with milk.
7
Never fill the jug
C
above the
maximum level indicator.
3 Close the lid
A
.
4 Place the jug
C
on the power
base
E
. Make sure that it is
sitting in an upright and stable
position.
5 Insert the plug into the wall
socket.
6 Push the on/off button
D
for
frothing and/or heating.
– For frothing push the on/off
button one time.
– For heating push the on/off
button two times.
Note:
7
During the process, the indicator
of the button
D
lights up red.
7 After the frothing or heating
process, the indicator light of
the button
D
flashes for 30
seconds.
8 Disconnect the plug from the
wall socket.
9 Take the jug
C
from the power
base
E
.
10 Open the transparent lid
A
by
removing it. Pour the milk or
foam from the jug
C
by using
the spout
B
in the cup or glass
you want to use.
Notes
7
Press and hold button
D
for 2-3
sec. to froth cold milk. The indi-
cator lights up blue.
7
Let the milk frother cool down
between each heating process.
7
Use whole milk (fat content
3.0%) for best results.
7
Milk heats to approximately
65+/-5°C. This is the ideal
temperature to ensure the best
flavor.