HAIR AND BEARD TRIMMER TOUCH CONTROL MC 7240 DE EN ES FR IT SV NL PL TR PT NO EL
_________________________________________________________ A B C D E F G H I J K 3
SAFETY___________________________________ Please read this instruction manual thoroughly prior to using this appliance! Follow all safety instructions in order to avoid damage due to improper use! 77 77 77 77 77 Keep the instruction manual for future use. Should a third party be given the appliance, ensure the instruction manual is included. Never use the appliance for any other purpose than those described in these instructions. 77 77 77 77 This appliance is intended for domestic use only.
SAFETY___________________________________ 77 77 77 77 If the adapter is damaged, it must be replaced by the manufacturer, a service center or a similarly qualified person to avoid any danger of electrical shock. Make sure that there is no danger that the power cord could be accidentally pulled or that someone could trip over it when the appliance is in use. Always keep the appliance out of the reach of children.
OVERVIEW________________________________ Dear Customer, Congratulations on the purchase of your MC 7240 Hair and Beard Trimmer Touch Control. Read the following user notes carefully to ensure full enjoyment of your quality Grundig product for many years to come. A responsible approach! GRUNDIG focuses on contractually agreed social working conditions with fair wages for both internal employees and suppliers.
OVERVIEW_ ______________________________ Controls See the figure on page 3. A Accessories H L arge blending comb attachment for 2mm cutting length. Ceramic/stainless steel blade. B Cutting /thinning selector switch. I mall blending comb attachS ment for 1mm cutting length. C Side guide grooves for the comb attachments. J D Indicator for the comb attachment positions. mall telescopic comb attachS ment for 4mm to 20 mm cutting lengths.
OPERATION______________________________ Preparation 1 Remove all packaging and keep safe for future storage. 2 Inspect the appliance before use to ensure the blades are free of hair, debris etc. 3 Before use, ensure that the trimmer is sufficiently charged or plugged into the mains. Charging 77 The unit automatically switches off due to deep discharge protection when the battery gets too low. Never leave the adapter plugged in when not in use. 1 Ensure the appliance is switched off.
OPERATION______________________________ Notes 77 The appliance remains in standby mode for around 10 seconds before it can be switched on again with the speed setting touch controls E, or switched off with the power F. switch 77 77 77 While charging, the adapter may become warm. This is normal and safe and does not indicate a malfunction of any kind. If the appliance has not been used for a long period, the capacity of the battery may decrease by a certain amount.
OPERATION______________________________ Small comb attachment J Position 1 4 mm Position 2 7 mm Position 3 9 mm Position 4 12 mm Position 5 15 mm Position 6 17 mm Position 7 20 mm Large comb attachment K Position 1 24 mm Position 2 27 mm Position 3 29 mm Position 4 32 mm Position 5 35 mm Position 6 37 mm Position 7 40 mm 77 All the measurements given here are approximate values.
OPERATION______________________________ Using the speed setting 1 Keep the speed setting touch E pressed to decontrol E to touch controls crease the speed and keep the turn the trimmer on/off speed setting touch Once the trimmer has been turned E pressed to incontrol F , it on with the on/off switch crease the speed. may be switched off or on again by using the speed setting touch Notes 77 Two short beeps indicate that E.
OPERATION______________________________ Cutting and thinning func- 2 Turn on the appliance by pressF. ing the on/off switch tion – The motor starts running and the speed setting touch conE light up. trols The cutting/thinning selector switch B allows selecting between cutting and thinning of hair. 1 Push the switch B upwards to activate the cutting function.
OPERATION_______________________________ 77 77 77 77 77 Cut the hair in a relaxed and slow manner. Use short strokes, working gradually over the entire head. Take care when using close to the ears, eyes and face. Always take off a little hair at a time, you can always trim additional hair later. While cutting, hair may collect on top of the cutting comb. Frequently and gently shake excess hair from the trimmer, in order to maintain the speed of the motor.
INFORMATION_ __________________________ Cleaning and care Storage 1 Switch off the appliance and, if using in mains mode, remove the adapter plug from the socket G . If you do not plan to use the appliance for a long period of time, please store it carefully. 2 Remove the comb attachment H , I , J , K and clean the blade A with the supplied brush. 1 Make sure that it is switched off and is completely dry. 2 Pack the parts in the original packaging and store them in a cool, dry place.
INFORMATION_ __________________________ Environmental note Technical data This product has been manufac- This product conforms to tured with high quality parts and the European directives materials which can be reused and 2004/108/EC, 2006/95/EC and are suitable for recycling. 2009/125/EC. Therefore, do not dispose of the product with normal domestic waste at the end of its service life.
Grundig Intermedia GmbH Beuthener Strasse 41 90471 Nürnberg www.grundig.
