HAIR AND BEARD CLIPPER MC 4841 MC 4842
------------------------------------------------------------------------------------------------------------------------------------------------------------------ A B C D G E F 2
SAFETY -------------------------------------------------------------------------------------------------------------------------------------Please note the following instructions when using the appliance: 7 After charging, always unplug the cable from the socket and disconnect the power supply unit from the mains. 7 This appliance is designed for domestic use only. 7 This appliance is designed for trimming hair and beards. Any other use is expressly prohibited. 7 Do not drop the appliance.
OVERVIEW-----------------------------------------------------------------------------------------------------------------------Dear customer, Congratulations on the purchase of your MC 4841/MC 4842 hair and beard trimmer.
OVERVIEW-----------------------------------------------------------------------------------------------------------------------Controls Accessories See the illustrations on page 2. G A Detachable ceramic/stainless steel cutting head. B Switch for thinning function. C Adjustable combing system for five trimming lengths. D Switch for turning on (»ON«) and off (»OFF«). E Charging display »CHARGE«. Lights up red when charging and green when it is fully charged.
POWER SUPPLY ---------------------------------------------------------------------------------------------------Rechargeable battery operation When operating the appliance with the built-in nickel metal hydride battery, only use the power unit supplied for charging. Check that the voltage indicated on the type plate of the power supply unit corresponds to your local power supply. 1 Press the button the appliance.
POWER SUPPLY ---------------------------------------------------------------------------------------------------Operating with the power supply unit Check that the voltage indicated on the type plate of the power supply unit corresponds to your local power supply. The only way to disconnect the appliance from the power supply is to unplug the power supply unit. 1 Plug the power cord into the appliance socket F and the power supply unit into the wall socket. – The appliance is now ready to operate.
PREPARATION---------------------------------------------------------------------------------------------------------Setting the trimming length The adjustable combing system has five different lengths: Position 1 Position 2 Position 3 Position 4 Position 5 Longer trimming lengths C 4 mm 7 mm 10 mm 13 mm 16 mm A second adjustable combing system is available for longer trimming lengths: Position 1 Position 2 Position 3 Position 4 Position 5 20 mm 24 mm 28 mm 32 mm 36 mm 1 Pull back the adjustable comb1 Set
PREPARATION---------------------------------------------------------------------------------------------------------Activating the thinning function 1 Push the switch B to the left. – The thinning function is activated. 2 Set the required trimming length as described. Switching on and off 1 Switch on the appliance by pushing the switch D to position »ON«. 2 Switch off the appliance by pushing the switch D to position »OFF«.
USE---------------------------------------------------------------------------------------------------------------------------------------------------Trimming hair Useful tips Make sure the hair is clean and completely dry. 7 Hold the appliance with a relaxed and comfortable grip. Place a towel around the neck and shoulders of the person whose hair you are trimming. Make sure the person is seated so that the head is roughly at your eye level.
USE -------------------------------------------------------------------------------------------------------------------------------------------------Beard trimming Trimming contours 1 Set the trimming length. 2 Press the button the appliance. D to switch on Note 7 If the appliance is blocked by thick hair while you are using it, turn it off. If running it from the mains, unplug the socket. Remove the combing system and clean the cutting head with the brush supplied.
CLEANING AND CARE ---------------------------------------------------------------------------Cleaning and care 1 Switch off the appliance and unplug it if you are running it from the mains. 2 Remove the adjustable combing system and clean the blade head A with the brush supplied. 7 The cutting head of your appliance does not normally need to be oiled.
INFORMATION -----------------------------------------------------------------------------------------------------Environmental note Technical data This product is manufactured from high-quality parts and materiais which can be reused and recycled. Therefore, do not dispose of the device and the builtin rechargeable battery along with normal household waste at the end of its service life.
