Operation Manual

103
DE
EN
Restoring the factory settings
When the factory settings are
restored:
• Display language will return to
the first language you selected
when you have operated your
machine for the first time:
• Brightness is set to maximum
level,
• Volume level is set to "High",
• Favourite programme selection is
returned to factory settings.
• Press and hold the Soiling Level
Adjustment button for 3 seconds
to enter the Settings menu. 1.
Open the "Factory Settings" menu
by pressing 1
st
and 3
rd
auxiliary
function buttons.
Factory Settings?
• Press the 2
nd
auxiliary function
button to reset to Factory
Settings.
SETTINGS BRIGHTNESS
• Press either 1
st
or 3
rd
Auxiliary
Function button to confirm to the
Factory Settings. "Save setting?"
will be displayed.
Store Settings?
• Settings will be saved once the
second auxiliary function button
is pressed.
SETTINGS BRIGHTNESS
Your machine is equipped
with a “Standby Mode”
In case of not starting any
programme or waiting without
making any other operation when
the machine is turned on by On/Off
button and while it is in selection
step or if no other operation is
performed approximately 2 minutes
after the programme you selected
has come to an end, your machine
will automatically switch to energy
saving mode. Brightness of indicator
lights will decrease. Also, if your
product is equipped with a display
showing the programme duration,
this display will completely turn off.
In case of rotating the Programme
Selection knob or pressing any
button, lights and display will restore
to their previous condition. Your
selections made while exiting the
energy saving mode may change.
Check the appropriateness of
your selections before starting the
programme. Readjust if necessary.
This is not a fault.