Instructions

16
ENGLISH
Before first use
7
Remove the transparent protection sleeve on
the power button
D
panel before using the
appliance for the first time.
Cleaning sensitive and small objects
1 Open translucent lid
A
and fill the stainless steel
tank
B
with water.
Caution
7
Do not exceed the “MAX” marking.
7
Do not operate the appliance without filling with
water, otherwise it will get damaged.
7
Use only clear, cold water.
2 Put the object in the plastic cleaning basket
H
.
3 Place the plastic cleaning basket
H
into the
stainless steel tank
B
.
4 Close the translucent lid
A
.
5 Plug the power cord
F
into a suitable power
outlet.
– Power on indicator light
C
illuminates for a
few seconds and disappears.
6 Press the power button
D
.
– The power on indicator light
C
illuminates and
the cleaning operation starts. It takes 5 minutes
for the appliance to finish cleaning operation.
7 When the cleaning operation finishes, the
appliance automatically stops and the power on
indicator light
C
disappears.
8 After using the appliance, disconnect the power
cord
F
from the power outlet.
9 Open the translucent lid
A
and take out the
plastic cleaning basket
H
with the object. Pour
out the water and clean the appliance. See the
“Cleaning and care” section.
Notes
7
You can put multiple of jewelries at the same time.
7
Put the glasses in the plastic cleaning basket
H
always with the glasses in upward position.
7
Plastic cleaning basket
H
absorbs one third of
the ultrasonic energy and decreases the cleaning
power. So it might be necessary to repeat the
cleaning operation more than once.
7
Be sure that the water level does not exceed the
“MAX” marking after placing the objects into the
Stainless steel tank
B
. If the “MAX” marking is
exceeded, take an object out until the water level
again matches with the “MAX” marking.
7
The object should be immersed well into the
water.
7
Do not press power button
D
while power on
indicator light
C
illuminates for a few seconds.
Press it after the light disappears.
7
The appliance has an integrated timer for 5
minutes of operation.
7
If you want to stop the cleaning operation earlier
than 5 minutes, press the Power button
D
.
Cleaning metal bracelets of
waterproof watches
1 Open translucent lid
A
and fill the stainless steel
tank
B
with water.
Caution
7
Make sure that the watch is waterproof and
suitable for cleaning in the Ultrasonic Cleaner.
7
Do not exceed the “MAX” marking.
7
Do not operate the appliance without filling with
water, otherwise it will get damaged.
7
Use only clear, cold water.
2 Place the watch onto the plastic watch holder
G
in the plastic cleaning basket
H
.
OPERATION ________________________________