User manual

17
ENGLISH
OPERATION
Check whether the mains voltage given on the
rating plate (on the underside of the appliance)
matches the local mains voltage.
Preparation
Your appliance is supplied with a dust bag
already fitted. Once you have assembled the
individual parts the appliance is ready to use.
1 Push the plug-in contact
G
of the elastic
hose in the contact
H
provided on the dust
container until it latches into place.
Note
■ To remove the elastic hose
G
, press the side
release buttons on the plug-in contact and
then pull out the hose.
2 Insert the other end of the flexible hose into
metal telescopic tube
C
.
3 Insert the required brush or accessories into the
lower end of into metal telescopic tube
C
.
Note
■ Fit together all the plug-in connections with a
push and turn movement and undo them with a
pull and turn movement.
Switching on and off
1 Pull out the required length of power cord.
Caution
■ The maximum cable length is indicated by a
red mark. Never try to pull out the power cord
beyond the red mark.
2 Plug the power cord plug into the wall socket.
3 Switch on the appliance by pressing button
O
.
4 Set the required suction power with controller
P
.
5 After use, press button
O
to switch off the
appliance and remove the power cord plug
from the wall socket.
Caution
■ If the appliance is not being used, always
disconnect the mains plug at the wall socket.