CYLINDER VACUUM CLEANER BODYGUARD VCC 4950 EN
________________________________________________________ F S C J T D B U G A R Q P O N M H I E K 3 L
________________________________________________________ ENGLISH 4 14 - 21
SAFETY Please read this instruction manual thoroughly prior to using this appliance! Follow all safety instructions in order to avoid damages due to improper use! Keep the instruction manual for future reference. Should this appliance be given to a third party, then this instruction manual must also be handed over. ■ The appliance is designed for domestic use only. Warranty will be voided if the appliance is used for industrial or commercial purposes.
AT A GLANCE Dear Customer, Congratulations on the purchase of your new vacuum cleaner VCC 4950. Read the following user notes carefully to ensure full enjoyment of your quality GRUNDIG product for many years to come.
OPERATION Flexible hose The flexible hose G is the connection between the appliance and the metal telescopic tube. 1 Insert the flexible hose with the flexible contact G into the suction intake H on the appliance until it latches in. 2 Insert the other end (handle) of the flexible hose into the metal telescopic tube. Small brush Use the small brush S to clean furniture or picture frames. It can be tilted up to an angle of 90°. 1 Push the small brush directly onto the handle for carrying E .
OPERATION Check whether the mains voltage given on the rating plate (on the underside of the appliance) matches the local mains voltage. Switching on and off 1 Pull out the required length of power cord. Preparation Your appliance is supplied with a dust bag already fitted. Once you have assembled the individual parts the appliance is ready to use. 1 Push the plug-in contact G of the elastic hose in the contact H provided on the dust container until it latches into place.
OPERATION Suction control Rewind power cord The suction control F is located on the handle which you can operate with your thumb. If the control is fully closed, the maximum suction power is reached. 1 Unplug the power cord plug from the wall socket. However, in some cases it is advisable to have less suction power, such as when cleaning material, upholstery or shag pile carpets. Open the control if and when required. 3 Carefully guide the power cord back into the appliance.
INFORMATION Change dust bag If the indicator R on the dust container changes to red, you must change the dust bag. 1 Unplug the power cord plug from the wall socket. 2 Open the dust container by pressing the button I of the dust container and lifting up the cover. Note ■ Test the appliance after changing the dust bag. If the indicator R is still red, the tools, hoses or filter are blocked (see following section). ■ You should use dust bags from Swirl®*, Type Y 05®* for VCC 4950.
INFORMATION 4 Shake out the filter, then wash it in hot soapy water, rinse well and leave to air dry. ■ Frequent washing results in filter wear and tear. Troubleshooting The appliance is equipped with a fuse discon nector, which automatically switches off the mo tor if it overheats. In this case, complete the fol lowing steps: 1 Switch off the appliance and disconnect the mains plug from the wall socket. Caution ■ Never put the filter into the washing machine or dry it with a hair dryer.
INFORMATION Environmental information This product has been made from high-quality materials and parts, which are suitable for recycling and can be reused. Therefore, at the end of its life, the product must not be disposed of in the normal domestic waste, but must be taken to a collection point for recycling electrical and electronic appliances. This is indicated by the following symbol on the product, in the instructions for use or on the packaging.
Grundig Intermedia GmbH Beuthener Strasse 41 90471 Nürnberg www.grundig.
