User manual

24 ENGLISH
OPERATION ______________________________
Useful tips
7
Hold the appliance with a re-
laxed and comfortable grip.
7
Always cut against the natural
direction of the hair.
7
As you cut, take a break at regu-
lar intervals. You can always
make a correction, but not once
the hair has been cut.
7
Only cut a small amount the first
time you use it. This is the only
way to get used to the variable
positions.
7
Keep combing the hair. Only
look for hair which is too long
and comb out clippings.
Beard trimming
1 Adjust the trimming length by refer-
ring to the “Preparation” section.
2 Press the On/Off switch
B
to
switch on the appliance.
– The appliance starts.
3 Place the cutting head
A
on the
beard.
4 Move the cutting head
A
against
the direction of hair growth. Apply
only a slight pressure when cutting
with slow, gentle movements.
5 After use, switch off the appliance
with the On/Off switch
B
.
Notes
7
If the appliance is blocked by
thick hair while you are using
it, switch it off. If running it from
the mains, unplug the socket. Re-
move the adjustable comb and
clean the cutting head with the
brush supplied. Clean the appli-
ance as described in the “Clean-
ing and Care” section.
7
For trimming contours, remove
the adjustable comb 1
D
or 2
G
. Use the appliance without the
combs (cutting length is 1.5 mm).