User manual

ENGLISH
23
INFORMATION
___________________________________
Cleaning and care
7
Turn the appliance off and
unplug it from the mains socket.
7
Take off the comb and clean
the cutting head with the brush
supplied.
7
Only clean the housing and the
comb with a damp, soft cloth.
Caution
7
Never put appliance or power
cord
C
in water or any other
liquid.
7
Before using the appliance again,
dry all parts properly using a soft
towel.
7
Do not use cleaning agents.
Note
7
Remove any clippings after each
use.
Adjusting the blades
When new, the blades are optimal-
ly aligned. However, you need to
readjust the blades if you replace
them or if you have removed the
bottom blade
A
for cleaning.
1 Loosen the screws.
2 Align the teeth of the bottom blade
A
and the top blade
B
.
The points of the teeth on the bot-
tom blade
A
should be roughly
1.2 mm behind those of the top
blade
B
.
3 If the blades are not correctly
aligned, switch off the appliance,
loosen the screws again and
readjust the blades.
4 Tighten the screws once you
have aligned the blades.
Note
7
If you want to maintain the
original condition of the cutting
head for as long as possible, it is
worth oiling the cutting head at
regular intervals.
Storage
If you do not want to use the
appliance for a long period of
time, please store it carefully.
7
Ensure that it is unplugged and is
completely dry.
7
Pack the parts in the original
packaging and store them in a
cool, dry place.
7
Make sure the appliance is kept
out of reach of children.