NOSE AND EAR HAIR TRIMMER MT 3910 ENGLISH
------------------------------------------------------------------------------------------------------------------------------------------------------------------ B C D 3 A
SAFETY-------------------------------------------------------------------------------------------------------------------------Please observe the following instructions when using the device: 7 This device is intended for domestic use only. 7 Do not immerse the device in water. 7 Clean the housing with a damp cloth. Do not use any cleaning agents. 7 Store the device in a cool and dry place. 7 If you do not wish to use the device for a long period of time, remove the batteries.
OVERVIEW-----------------------------------------------------------------------------------------------------Dear customer, congratulations on the purchase of your MT 3910 nose and ear hair trimmer. Read the following user notes carefully to ensure you can enjoy your quality product from Grundig for many years to come. Special features – Easy and gentle removal of all nose and ear hairs – Washable attachment for the washable trimmer blades Controls See the illustration on page 3.
POWER SUPPLY---------------------------------------------------------------------------The device operates with the enclosed batteries 2 x 1,5 V AAA/LR 03. Inserting the batteries 1´ Remove the battery housing D . 2´ Insert the supplied batteries into the housing. Ob- serve the polarity indicated in the housing. D and press it down until it catches. 3 Replace the housing Notes: Do not expose the batteries to extreme heat, caused for example by direct sunlight, heaters or fire.
USE-------------------------------------------------------------------------------------------------------------------------------------------Trimming nose or ear hair 1´ Remove the protective cap A . 2´ Press the button C to switch on the device. 3 Carefully insert the device with the trimmer attachment into the nose or ear. Note: Do not insert the device too far into the nose or the ears during use. 4´ Press the button C to switch off the device after use.
USE-------------------------------------------------------------------------------------------------------------------------------------------2´ After cleaning and drying, replace the housing for the trimmer blades B by turning the housing clockwise and making sure that it firmly engages in the position marked. 3´ Replace the protective cap A . Notes: Only clean the housing of the device with a damp cloth. Do not use any cleaning agents or other fluids.
INFORMATION--------------------------------------------------------------------------------Environmental note This product has been made from high-quality parts and materials which can be re-used and recycled. Therefore, do not dispose of the product along with normal household waste at the end of its service life. Take it to a collection point for the recycling of electrical and electronic equipment.
Grundig Intermedia GmbH Beuthener Strasse 41 90471 Nürnberg www.grundig.
