User manual

ENGLISH
11
OPERATION
___________________________________________________________
Operation
Check if the mains voltage on the type plate (on the
handle of the device) corresponds to your local mains
supply.
1 Towel dry your hair thoroughly after washing.
2 Attach the
F
concentrator nozzle on the hairdryer
and align it as required.
3 Plug the power cord
A
into the wall socket.
4 Turn on the appliance with switch
C
and set the
blower level.
5 Set the temperature level with switch
B
.
6 While drying, you can interrupt the hot air flow, by
pressing and holding down
D
(Cool Shot).
Note
7
The Cool Shot interrupts the hot air with a flow of
cold air. This allows you to fix your hairstyle better
and more lastingly.
7 While drying, you can switch to the turbo blower
level, by pressing the
E
button.
8 After use, switch off the appliance with the
C
button and pull out power cord
A
from the wall
socket.
Caution
7
Never wind the power cord around the appliance,
as this can result in damage.
Check the power cord and the appliance regularly
for visible damage.
Cleaning and care
Pull the plug out before cleaning.
Never submerge the appliance in water.
Use a soft, dry cloth to clean the housing. Remember
to clean the air inlet grille
G
occasionally with a soft
brush to remove hairs and dust.
Take off the air inlet grille
G
and clean the filter at
regular intervals. Pull back the grille to do this.
Environmental note
This product has been made from high-quality parts
and materials which can be re-used and recycled.
Therefore, do not throw the product away
with normal household waste at the end
of its service life. Take it to a collection
point for recycling electrical and electronic
devices. This is indicated by this symbol
on the product, in the operating manual and on the
packaging.
Please find out about collection points operated by
your local authority.
Help protect the environment by recycling used prod-
ucts.
Technical data
This product fulfils the European directives
2004/108/EC and 2006/95/EC
2009/125/EC.
Power supply
230 - 240 V∼ 50 Hz
Power
1800 - 2000 W
INFORMATION
______________________________________________________
Technical and design modifications reserved.