User manual

ENGLISH 29
CLEANING AND CARE _____________________
General information
The appliance must be cleaned
regularly so that you can continue
to enjoy its top performance and
optimum results.
Cleaning
1 Press the On/Off switch
B
to
switch off the appliance and un-
plug the power adapter if you are
running it from the mains.
2 Remove the adjustable comb 1
E
or adjustable comb 2
H
from
the appliance. Clean the cutting
head
A
with the cleaning brush
K
provided.
3 Remove the cutting head
A
by
pushing the blade outwards.
Clean the cutting head
A
and the
cavity in the appliance with the
cleaning brush
K
provided.
4 Insert the cutting head
A
by first
placing the claw into the cavity
and pressing on the cutting head
until it clicks on its place.
Notes
7
Never use water or any other
liquids to clean the appliance.
Only use the cleaning brush
provided.
7
You can rinse the cutting head
and the two adjustable combs
with water, but you must remove
them from the appliance first.
7
Remove any clippings after
each use.
7
The cutting head of your appli-
ance does not normally need
to be oiled. If you want to
maintain the original condition
of the cutting head for as long
as possible, it is worth oiling it at
regular intervals (with the oil
L
provided).