HAIR AND BEARD CLIPPER MC 6040 ENGLISH
_________________________________________________________ A E F G B H I J C D 2 K L
SAFETY___________________________________ Please note the following instructions when using the appliance: 77 77 77 The appliance is designed for domestic use only. This appliance is designed solely for trimming human hair and beards. Any other use is expressly prohibited. 77 77 77 77 Never use or charge the appliance in the bath, shower or over a wash basin filled with water; nor should it be operated with wet hands.
SAFETY___________________________________ 77 77 77 Keep the appliance out of the reach of children. The appliance may not be used by the following people, including children: those with limited physical, sensory or mental capabilities or those with a lack of experience and knowledge. This does not apply to the latter if they were instructed in the use of the appliance or if they use it under the supervision of a person responsible for their safety.
OVERVIEW________________________________ Dear Customer, 77 Congratulations on the purchase of your MC 6040 hair and beard clipper. Please read the following user notes carefully to ensure you can enjoy your quality GRUNDIG product for many years to come. A responsible approach! GRUNDIG focusses on contractually agreed social working conditions with fair wages for both internal employees and suppliers.
POWER SUPPLY_ __________________________ Rechargeable battery operation When operating the appliance with the built-in nickel metal hydride battery, only use the power adapter supplied for charging. Note 77 The groove on the charging plug J must match the notch in the appliance socket. Check that the voltage indicated on the rating plate of the power adapter corresponds to your local power supply. The power adapter has an automatic 100 - 240 V∼, 50/60 Hz transformer which works anywhere in the world.
POWER SUPPLY_ __________________________ Using the charging stand 1 Press the On/Off switch B to switch off the appliance. 2 Insert the charging plug J into the socket at the back of the charging stand D . 4 Pull the power adapter I out of the wall socket. 5 Remove the appliance from the charging stand D . Notes 77 Note 77 The groove on the charging plug J must match the notch in the charging stand D socket. 77 77 77 3 Plug the power adapter I into the wall socket.
POWER SUPPLY_ __________________________ Operating with the power adapter Check that the voltage indicated on the rating plate of the power adapter corresponds to your local power supply. The only way to disconnect the appliance from the power supply is to unplug the power adapter. 1 Plug the charging plug J into the appliance socket and the power adapter I into the wall socket. Note 77 The groove on the charging plug J must match the notch in the appliance socket. – The appliance is now ready to operate.
PREPARATION_____________________________ Notes 77 77 77 The trimming length without combing system is 1.5 mm. Trimming without a comb is perfect for designer stubble. Width of cutting head 40 mm.
PREPARATION_____________________________ 1 Slide the adjustable comb 1 E or the adjustable comb 2 H over the cutting head A . Make sure that the notches on the adjustable combs are properly inserted into the grooves on the sides of the appliance. 2 Adjust the trimming length by pressing the comb latch G forwards or backwards into the required position. Make sure that the adjustable comb 1 E or the adjustable comb 2 H clicks into its place. – The position indicator F shows the adjusted length position.
OPERATION_______________________________ Trimming hair Make sure that the hair is clean and completely dry. Place a towel around the neck and shoulders of the person whose hair you are trimming. Make sure that the person is seated so that their head is roughly at your eye level. Before trimming, comb the hair so that it falls naturally and you can see the direction in which it grows. 1 Adjust the trimming length by referring to the “Preparation” section.
OPERATION_______________________________ Notes 77 77 If the appliance is blocked by thick hair while you are using it, switch it off. If running it from the mains, unplug the socket. Remove the adjustable comb and clean the cutting head with the brush supplied. Clean the appliance as described in the “Cleaning and Care” section. For trimming contours, remove the adjustable comb 1 E or adjustable comb 2 H . Use the appliance without the combs (cutting length is 1.5 mm).
CLEANING AND CARE______________________ General information The appliance must be cleaned regularly so that you can continue to enjoy its top performance and optimum results. Cleaning 1 Press the On/Off switch B to switch off the appliance and unplug the power adapter if you are running it from the mains. 2 Remove the adjustable comb 1 E or adjustable comb 2 H from the appliance. Clean the cutting head A with the cleaning brush K provided. 3 Remove the cutting head A by pushing the blade outwards.
INFORMATION_ __________________________ Storage Environmental note If you do not plan to use the appliance for a long period of time, please store it carefully. This product is manufactured from high-quality parts and materials which can be reused and recycled. Make sure that it is unplugged and is completely dry. Therefore, do not dispose of the device and the built-in rechargeable battery along with normal household waste at the end of its service life.
INFORMATION_ __________________________ Technical data This product conforms to the European directives 2004/108/EC, 2006/95/ EC and 2009/125/EC. Power supply Power adapter: HC-11-036100EU Input: 100‒240 V~; 50/60 Hz Output: 3.6 V DC 1000 mA Batteries: Nickel metal hydride Ni-MH Ni-MH Design and specifications subject to change without notice.
Grundig Intermedia GmbH Beuthener Strasse 41 90471 Nürnberg www.grundig.
