User manual

9
ENGLISH
Packing contents
1 HD 3700 1800 W ceramic hair dryer
2 Slim concentrator nozzle
E
for professional styling
Settings
Your appliance has the following settings:
Blower level
C
– 0: Off
– 1: Gentle air flow
– 2: Strong air flow
Temperature level
B
– : Cool air
– : Moderate temperature for gently drying and
styling
– : High temperature for fast drying
Cold setting (Cool Shot)
D
– d: İnterrupts heating and provides a cool air flow
Operation
Check if the mains voltage on the type plate (on the
handle of the device) corresponds to your local mains
supply.
1 Towel dry your hair thoroughly after washing.
2 Attach the
E
concentrator nozzle on the hairdryer
and align it as required.
3 Plug the power cord
A
into the wall socket.
4 Turn on the appliance with switch
C
and set the
blower level.
5 Set the temperature level with switch
B
.
6 While drying, you can interrupt the hot air flow, by
pressing and holding down
D
(Cool Shot).
Note
7
The Cool Shot interrupts the hot air with a flow of
cold air. This allows you to fix your hairstyle better
and more lastingly.
7 After use, switch off the appliance with the
C
button and pull out power cord
A
from the wall
socket.
Caution
7
Never wind the power cord around the appliance,
as this can result in damage.
Check the power cord and the appliance regularly
for visible damage.
Cleaning and care
Pull the plug out before cleaning.
Never submerge the appliance in water.
Use a soft, dry cloth to clean the housing. Remember
to clean the air inlet grille
G
occasionally with a soft
brush to remove hairs and dust.
Take off the air inlet grille
G
and clean the filter at
regular intervals. Pull back the grille to do this.
HAIR DRYER HD 3700
___________________________________________