BODY HAIR TRIMMER MT 5531
_________________________________________________________ A B C D H E F G 2
SAFETY _______________________________________________ Please note the following instructions when using the appliance: 7 7 7 7 7 The appliance is designed for domestic use only. This appliance should only be used for removing body hair. Any other use is expressly prohibited. 7 Observe these instructions in order to prevent damage to the appliance or danger arising from improper use. Keep them in a safe place. 7 7 Never use the appliance in the bath.
SAFETY _______________________________________________ 7 7 7 Keep the appliance away from children. The device may not be used by the following people, including children: those with limited physical, sensory or mental capabilities and also those with a lack of experience and knowledge. This does not apply to the latter if they were instructed in the use of the device or if they use it under the supervision of a person responsible for safety.
OVERVIEW__________________________________________ Fold out page 3 so that you have the illustrations in front of you. Controls Accessories 1 Power supply unit. 2 Charging unit. 3 Precision trimmer. 4 Razor foils attachment. 5 Extendable plug-in comb for different trimming lengths. A Ceramic blade of the cutting head. B Steel blade of the cutting head. C Precision trimmer. D Switch for turning on and off. 6 Oil. E Contacts for plugging into the charging unit. 7 Cleaning brush.
POWER SUPPLY ___________________________________ Charging the battery The appliance runs with the built-in, rechargeable nickel metal hydride battery. Use the power supply unit supplied and the charging unit for charging the appliance. 1 Put the contacts E of the appliance into the contact in the charging unit. 2 Plug the power supply unit into the E socket on the charging unit. 3 Plug the power supply unit into the wall socket. – The indicator H lights up red.
OPERATION ________________________________________ Switching on and off 1 Press the sliding switch D to turn the appliance on and off. Trimming hair 1 Use the ceramic/stainless steel cutting head without attachments for the closest possible trimming. Note 7 The trimming width of the ceramic/stainless steel cutting head is 25 mm. 4 Push the trimmer back as far as it will go to deactivate it. Note 7 The trimming width of the precision trimmer is 14 mm.
OPERATION ________________________________________ Level 2 Level 4 Level 6 Level 8 Level 10 2 mm 4 mm 6 mm 8 mm 10 mm 2 Attach the precision trimmer by pushing the attachment into the slots on the appliance and let it latch into place. 3 Take off the comb by pushing the catch lever upwards. Trimming nose and ear hair 1 Take off the ceramic/stainless steel cutting head by pressing on the ceramic blade (white) and lift it off.
OPERATION ________________________________________ Removing hair completely 1 Take off the cutting head or precision trimmer. 2 Attach the razor foil attachment by pushing it into the slots on the appliance and let it latch into place. 3 Remove hair at the appropriate place just like using a shaver.
CLEANING AND CARE ___________________________ Cleaning and care 1 Switch off the appliance. 2 Take off the comb. 3 Clean the housing, the cutting head and the comb attachment or any other attachments with a soft damp cloth or the supplied brush. Note 7 You can also wash the cutting head under running water. Never completely submerge the appliance in water. 4 Before using the appliance again, dry all parts completely using a towel. 5 Do not use cleaning agents. 6 Put the comb back on again.
INFORMATION ____________________________________ Guarantee Environmental note The guarantee does not cover the cutting head or defects which do not significantly impair the value or function of the appliance. The guarantee is invalidated if the appliance is damaged, opened or improperly used. This product has been made from high-quality parts and materials which can be re-used and recycled. Technical data This product fulfils the European directives 2004/108/EC, 2006/95/EC and 2009/125/EC.
