User manual

19
ENGLISH
POWER SUPPLY
____________________________________
Operation with
rechargeable batteries
When using the built-in rechargeable
nickel metal hydride batteries, use the
mains adapter supplied as a charger.
1 Plug the mains adapter into the
F
socket, and plug the mains adapter
into the mains socket.
– The indicator
G
lights up red.
– The green status displays show
how the charging is progressing.
They flash until the respective
capacity has been reached (20,
40, 60, 80 and 100 %) and then
remain lit.
– Once charging is complete, all
status displays are lit in green.
Notes
7
Completely charge up the batteries
(24 hours) before you first use them
or if you have not used them for a
long time.
7
After the batteries are first charged,
the charging time is approx.
12 hours when the appliance is
switched off. If you switch on the
appliance while it is charging, charg-
ing will stop.
7
The ambient temperature should be
between 5 °C and 40 °C.
7
When fully charged, the appliance
works for around 45 minutes. It is
not advisable to charge the batter-
ies after every use, especially if you
do not use the appliance for the full
45 minutes. Only charge the batter-
ies when they are completely dis-
charged. This increases their life. Do
not charge them every day.
7
The green status displays show the
capacity of the respective recharge-
able batteries. If, for example, a
capacity of only 40 % is reached,
the green displays 20 and 40 light
up. If the rechargeable batteries are
completely empty the red charge
indicator flashes.