User manual

23
ENGLISH
CLEANING AND CARE
____________________________
Cleaning and care
1 Switch off the appliance and
unplug it if you are running it from
the mains.
2 Take off the comb.
3 Clean the housing, the cutting head
and the comb attachment with a
soft damp cloth or the supplied
brush.
Note
7
The cutting head and the appliance
can be cleaned under running
water. However, you must never
completely immerse the appliance
in water.
4 Before using the appliance again,
dry all parts completely using a
towel.
5 Do not use cleaning agents.
6 Put the comb back on again.
Notes
7
Remove any clippings after each
use.
7
Normally the cutting head of your
appliance does not need to be
oiled. If you want to maintain the
original condition of the cutting head
for as long as possible, it is worth
oiling it at regular intervals (with the
oil provided).