User manual

21
ENGLISH
OPERATION
________________________________________
Special features
The appliance has a ceramic/
stainless steel (
A
and
B
)
cutting
head.
It guarantees exceedingly precise trim-
ming and is maintenance-free.
The hair trimmer is suitable for use on
dry and wet hair.
Trimming hair
1 Put on comb
1
to
7
for the cut-
ting grade you need (see the table
on page 22).
2 To do this, latch the holders of the
comb attachment into the pins
C
on the right and left side of the
appliance. First, push the left holder
over the left pin, then the right
holder over the right pin. Ensure
that the holder you fixed first does
not spring off the pin while you are
doing this.
3 Place a towel around the neck and
shoulder of the person whose hair
you are trimming. Make sure the
person is seated so that their head
is roughly at your eye level. Before
trimming, comb the hair so that it
falls naturally and you can see the
direction in which it grows.
4 Switch on the appliance using the
switch
I
and start trimming.
5 Turn off the appliance using the
I
switch when you have finished trim-
ming.
6 Take off the comb.
C