Operation Manual

4.6. Alarm Application

The camera is equipped with one alarm input and one relay output for alarm application. Please refer to the

alarm pin definition below for the connection of alarm devices to the IP Camera if needed.

Alarm Pin Definition :

PIN 1: Output+

PIN 2: Output-

PIN 3: Input+

PIN 4: Input-

Additional for GCI-K1503B with RS-485 Interface:

PIN 5: GND

PIN 6: D-

PIN 7: D+

5. Accessing the Camera

For initial access to the IP Camera, users can search the camera through the installer program: GRUNDIG

Finder.exe, which can be found on the supplied CD.

GRUNDIG Finder Software Setup :

Step 1: Double-click on the program GRUNDIG Finder.exe (see the desktop icon below). Its window will appear as

shown below. Then click on the “Find Device” button.

Step 2: The security alert window will pop up. Click “Unblock” to continue.

English