Operation Manual

Video OCX protocol setting options include:

- RTP over UDP / RTP over RTSP (TCP) / RTSP over HTTP / MJPEG over HTTP

(Select a mode according to your data delivery requirements.)

- Multicast Mode:

Enter all required data, including multicast IP address, H.264 video port, MJPEG video port, audio port and TTL

into each blank.

Click “Save” to confirm the setting.

10.4. Video Frame Skip

Video frame skipping is for saving bandwidth if necessary. The setting page is shown below.

Video Frame Skip options include:

- No skipping, default

- Frame skipping at 2 frame interval

- Frame skipping at 5 frame interval

- Frame skipping at 10 frame interval

- Frame skipping to 15 frame interval

Click “Save” to confirm the setting.

NOTE: Higher frame skipping rate will decrease video smoothness.

English