Operation Manual

- Send HTTP notification:
Check this item, select the destination HTTP address, and specify the parameters for event notifications when
<Alarm> is triggered. When an alarm is triggered, the notification can be send to the specified HTTP server.
File Name :
Enter a file name into the blank box, e.g. image.jpg. The uploaded image’s file name format can be set in this
section. Please select the one that meets your requirements.
- Add date/time suffix:
File name: imageYYMMDD_HHNNSS_XX.jpg
Y: Year, M: Month, D: Day
H: Hour, N: Minute, S: Second
X: Sequence Number
- Add sequence number suffix (no maximum value):
File name: imageXXXXXXX.jpg
X: Sequence Number
- Add sequence number suffix up to _ and then start over:
File Name: imageXX.jpg
X: Sequence Number
The file name suffix will end at the number being set. For example, if the setting is “10,” the file name will start
from 00, end at 10, and then start all over again.
- Overwrite:
The original image in the FTP site will be overwritten by the new uploaded file with a static filename.
Save :
After completing all the settings mentioned above, please click on the Save button to save all the settings in this
page.
39
English