Operation Manual

<SNMP> (Simple Network Management Protocol) :

With Simple Network Management Protocol (SNMP) support, the IP Camera can be monitored and managed

remotely by the network management system.

SNMP v1/v2 :

- Enable SNMP:

Select the version of SNMP to use by checking the box.

- Read Community:

Specify the community name which has read-only access to all supported SNMP objects. The default value is

“public”.

- Write Community:

Specify the community name which has read/write access to all supported SNMP objects (except read-only

objects). The default value is “write”.

Traps for SNMP v1/v2 :

Traps are used by the IP Camera to send messages to a management system about important events or status

changes.

- Enable Traps:

Check the box to activate trap reporting.

- Trap address:

Enter the IP address of the management server.

- Trap community:

Enter the community to use when sending a trap message to the management system.

Trap Option :

- Warm Start:

A Warm Start SNMP trap signifies that the SNMP device, i.e. the IP Camera, performs a software reload.

Click the “Save” button when completing.

English